Representing AGET Manufacturing Company
995 East 256th Street * Sheridan, Indiana 46069

The following pictures are a few examples of Dustkop and After Filter systems we have installed recently at area schools.   Click on the image to view an enlarged picture.
 


FT25S-D1 after filter unit w/pull-through exhauster for a pottery class collection. And 20SN51-D1 pull- through w/FT40-SP after filter & shaker motor for a wood shop collection.

 




K&B 'Quick-clamp' ductwork to various drops for school wood shop class.

 

High efficiency cyclones with three filter choices.  Left  models for metal grinding (fiberglass replacement filters); right models -- "C" for combination coarse and light dust (single bag filter); bottom -- "T" for combination coarse and very fine dust (24 filter tubes).  "D1" indicates 1 storage drum; "D2" indicates 2 drums.  Many more models available.    Contact us for more information.


 

FOR METAL GRINDING

INLET SIZE

MODEL

CFM

HP

L

W

H

4

520

300

1/3

23

18

24

5

800

650

3/4

30

20

42

6

1151

1000

1 1/2

36

20

42

7

2031

1500

3

40

24

81

 

FOR WOOD, PLASTIC, & FINE DUST

  ADD "C" OR "T" "C" "C"-D1 "T" "T"-D1
INLET SIZE MODEL L W H L W H L W H L W H
4 5( )20- 23 12 71 32 30 112            
5 8( )50- 30 20 83 39 30 120       42 30 152
6 11( )51- 36 20 100 41 30 138 41 25 110 41 30 148
7 20( )31- 40 24 147 42 30 179 40 24 132 42 30 165

See something you want?  Contact us for more information.

 


See Filters with "Pull-Through" Exhausters for specs.


This combination Chip-Mist collector is designed for use in matching and grinding operations where there are quantities of chips or solid materials mixed with coolants.  Mist, mixed with chips or moisture-laden particles, is pulled into the DUSTKOP where the solids are separated from the air and deposited into a 55 gallon drum.  From the cyclone, air is forced upward into a MISTKOP filter where the moisture is separated from the air and drained into a container or the sump of the equipment.  This combination unit is designed for those operations where chips covered with oil, wet dust, and other particles of this type are created.  Salvage of waste materials is possible, when they are of value, in a standard 55 gallon drum.

 

MODEL HP CFM INLET SIZE INLET HEIGHT L W H
11NM51-D1 1 1/2 to 900 6" 62" 41" 30" 9' 0"
20NM31-D1 3 to 1500 7" 77" 41" 30" 10' 6"
30NM51-D1 7 1/2 to 2400 8", 10" 96" 49" 33" 12'

See something you want? Contact us for more information.