Cyclone Dust Collector

High-Efficiency Cyclonic Separation for Chips, Shavings, and Product Recovery

Cyclone dust collectors separate chips, shavings, and heavy particulate using centrifugal force — no filter media required. We supply AGET pull-through and push-through cyclones from 400 to 3,500+ CFM, two-stage systems with FILTERKOP after-filters for return air applications, and high-volume industrial cyclones for pre-cleaning up to 165,000+ CFM. Use as a standalone collector, a product recovery device, or a pre-cleaner to extend downstream filter life.

Categories: Cyclone Collectors, Mist, Fume & Dust Collection

Skip the wait. Speak to a human. Direct Line: 317-910-1497

Optimized for Heavy Particulate, Pneumatic Conveying, and High Temperatures

Industrial Cyclone Dust Collectors — Centrifugal Separation for Chips, Shavings, and Heavy Particulate

Cyclone dust collectors separate heavy chips, shavings, and coarse particulate from the airstream using centrifugal force, no filter media required for primary separation. The cone-shaped housing spins incoming air at high velocity, forcing material out of the airstream and down into a collection container while cleaned air exits through the top outlet. Cyclones are the right choice when the dust load is too heavy for a filter-only system, when abrasive material would shorten filter life, or when you need to recover product rather than simply dispose of it. They’re also the standard first stage in two-stage systems. The cyclone handles the bulk of the material load while a downstream baghouse or cartridge collector captures the remaining fines. We distribute cyclone systems from AGET Manufacturing and SLY Inc, covering compact pull-through units with integral fans for single-machine applications through large industrial cyclones serving entire production facilities.

Airflow Range: 400 CFM to 165,000+ CFM
Separation Efficiency: 90–99% on particles above 10 microns
No Filter Media Required: Primary separation relies entirely on centrifugal force
Construction: Carbon steel standard; abrasion-resistant linings available for metalworking
Installation: Indoor or outdoor — weatherproofed housings standard on AGET SN series
Storage: 55-gallon drum, hopper, or bin arrangements

Cyclone Configurations We Supply

Configuration	Airflow	Manufacturer	Ideal Applications
Pull-Through Cyclone Integral fan on clean-air side	400 – 3,500+ CFM	AGET SN Series	Woodworking, machining, grinding, buffing — single or multi-machine
Two-Stage: Cyclone + After-Filter Cyclone pre-separator + FILTERKOP baghouse	300 – 7,000 CFM	AGET DUSTKOP SC Series	Indoor shops requiring return air; mixed chip and fine dust loads; woodworking, plastics
Push-Through Cyclone Fan upstream of cyclone; belt drive	1,000 – 30,000+ CFM	AGET NB/NS Series	High-volume chip and shaving removal; sawmill, cabinet, furniture production
High-Efficiency Industrial Cyclone Large-diameter; multiple or single units	5,000 – 165,000+ CFM	SLY Inc	Heavy industrial pre-cleaning; pneumatic conveying; product recovery; pre-separator ahead of large baghouse

Cyclone vs. Filter Collector — Choosing the Right First Stage

Factor	Cyclone Only	Cyclone + After-Filter	Filter Collector Only
Particle size captured	10+ microns reliably	Sub-micron with after-filter	Sub-micron
Heavy chip/shaving loads	✅ Handles without clogging	✅ Cyclone absorbs the load	❌ Will blind filters rapidly
Return air to building	❌ Not compliant alone	✅ After-filter enables recirculation	✅ With correct media
Abrasive materials	✅ No media to wear out	✅ Cyclone handles abrasion	⚠️ Abrasion shortens filter life
Maintenance	Empty collection container — no filters	Empty container + periodic filter reconditioning	Regular filter cleaning/replacement

Need help selecting between a standalone cyclone, a two-stage system, or a direct filter collector? Call us we’ll size the right configuration for your material, airflow, and compliance requirements.