Replacement Filter Media for AGET FILTERKOP, DUSTKOP, and MISTKOP Systems

Replacement Filter Media for AGET FILTERKOP, DUSTKOP, and MISTKOP Systems

AGET manufactures three distinct types of replacement filter media depending on the collector. FILTERKOP dust collectors use tube-style filter media. DUSTKOP cyclone and baghouse collectors use filter bags. MISTKOP mist collectors use roll media filters. All three require OEM-matched replacements, generic substitutes will result in poor fit, reduced efficiency, and premature failure. We supply replacement media for the complete AGET line as an authorized distributor. Call with your model number and we’ll confirm the correct part and lead time.

FILTERKOP Replacement Filter Tubes

FILTERKOP systems use woven tube-style filter media, not pleated cartridges. The correct replacement depends on your collector model, tube height, and the media type appropriate for your application. Using the wrong tube diameter, height, or cuff style will result in poor fit and reduced filtration performance. AGET offers the following filter tube media options for FILTERKOP collectors:

Media Type	Best For
Standard Cotton Sateen	General dry dust collection; service life up to 10 years in clean, dry applications
Flame Retardant Cotton Sateen	Applications with combustible dust or spark risk
Napped Cotton Sateen	Fine or light dust; napped surface improves dust cake release during shaking
Napped Cotton Sateen w/ Ground Wire	Static-sensitive dust applications; grounded to dissipate static buildup
Napped Polyester Sateen	Moderate moisture or humidity environments where cotton is not suitable
STO1 Seamless Polyester Knit	Smooth surface for easy dust release; good for sticky or hygroscopic dusts
Bean Bag Polyester Knit	Heavier dust loads; durable knit construction
Napped Polypropylene	Chemical-resistant applications; suitable where cotton or polyester media is incompatible

What to Have Ready When You Call

• Collector model & serial number (found on unit nameplate)
• AGET filter part number if available (printed on existing tube or in manual)
• Tube height, confirm before ordering, as heights vary by model series
• Tube width, confirm before ordering, as heights vary by model series
• Media preference from the options above, or describe your application and we’ll recommend the right media

MISTKOP Replacement Roll Media Filters

MISTKOP mist collectors use roll media filters matched to the collector’s housing. Primary and secondary FM-1 filters are available separately. The FM-1 secondary filter adds a second stage for finer mist and smoke particles and is recommended in high-concentration mist applications.

What to Have Ready When You Call

• Collector model & serial number (found on unit nameplate)
• Whether you need primary filter only or primary and FM-1 secondary
• Number of units, filters are sold individually

HEPA and ASHRAE After-Filters

HEPA and ASHRAE after-filters are available for AGET systems where a secondary high-efficiency filtration stage is required, typically for recirculating air back into the workspace or for applications with fine breathable dust. These mount downstream of the primary collector and are sized to the collector’s outlet. Call for availability and sizing. As an authorized AGET distributor serving Indiana we source OEM replacement filter media for the complete FILTERKOP, DUSTKOP, and MISTKOP line. Call us with your model number and we’ll confirm the correct part and lead time.